Core strengths

【 Efficient thermal conductivity, extremely low thermal resistance 】 The thermal conductivity coefficient is as high as 12.0W/m · K, and the thermal resistance is only 0.053 ℃ · in ²/W at 50 ℃ and 30psi. The ultra-high power device conducts heat rapidly, and the heat dissipation efficiency is increased by more than 200% compared to conventional products

Self adhesive reuse, easy to operate. It comes with excellent self-adhesive properties, no need for additional adhesive coating, can be peeled off and pasted immediately, can be reused after installation, reduces material loss, adapts to low-voltage installation scenarios, simplifies assembly processes and post maintenance

【 Soft adaptation, strong filling 】 With a 40 Shore 00 soft texture, it can tightly adhere to electronic components and heat sinks under low pressure, fill irregular gaps, eliminate air residue, and significantly reduce contact thermal resistance

【 High insulation safety, stable and reliable 】 The dielectric breakdown strength reaches 19.0 kV/mm, the volume resistivity is 9.0 × 10 ¹ ² ohm cm, and the insulation performance is excellent; Working temperature -50-200 ℃, UL94 V0 level fire protection, long-term use without aging and failure risk

Applicable scenarios

Core application devices/components

Network communication equipment: router, switch core module, high thermal conductivity efficiency reduces equipment operating temperature, ensures signal transmission stability

Optical module: high-speed optical module heat dissipation surface, low voltage adaptation installation requirements, self-adhesive reusable for easy maintenance and replacement

New energy vehicles: battery pack heat dissipation module, motor controller, 12W high thermal conductivity suitable for high-power heat dissipation, wide temperature tolerance for extreme vehicle environments

Industrial high-power electronics: inverters, IGBT power modules, high insulation performance to meet electrical safety requirements, soft filling to enhance heat dissipation stability

Instructions for Use

1. Clean the surface and heat dissipation structure of the heating element with anhydrous ethanol, remove oil and dust, and air dry until there are no residues;

2. Confirm that the product thickness matches the installation gap, cut it to the required size as needed, and remove the protective film on the surface of the thermal pad;

3. Align the installation position with the thermal pad and lightly press it to ensure full contact between the thermal pad and the surface, ensuring no residual bubbles;

4. In conjunction with screw locking or buckle fixation, it is recommended to apply a pressure of 20-60psi to ensure a stable fit without the need for additional adhesive coating.

Precautions

Storage conditions: Sealed and stored in a cool and dry place (8-28 ℃), avoiding direct sunlight and high temperature and humidity environment. Shelf life is 12 months from the date of production

Usage taboos: Avoid contact with strong acids, bases, and organic solvents, and prohibit use in food contact scenarios and extreme vacuum environments

Thickness selection: Choose the appropriate thickness based on the installation gap, and it is recommended to reserve 10-20% compression to ensure the fitting effect

Customization Description: Supports cutting customization within the thickness range of 0.5-8.0mm, specific length and width dimensions and required thickness need to be provided